
In-line Blanking & Precision Sheet Cut To Length
BSi processing offers In-line blanking & precision sheet cut to length. Our latest cut to length line is fitted with a renowned American built Red Bud precision leveller.
The Blanking & precision sheet cut to length offers a full range of products that can be tailored to the customer’s requirements, such as hot rolled, cold rolled, galvanised, or pre-painted material. Our processing facility boasts one of the most advanced In-line Blanking & Precision Sheet Cut to Length lines which can achieve the best tolerances using advanced blanking technology in the industry. The leveller for precision levelling offers options from 0.5mm to 2mm thickness.
In-line Blanking & Precision Sheet Cut To Length

BSi processing offers In-line blanking & precision sheet cut to length. Our latest cut to length line is fitted with a renowned American built Red Bud precision leveller.
The Blanking & precision sheet cut to length offers a full range of products that can be tailored to the customer’s requirements, such as hot rolled, cold rolled, galvanised, or pre-painted material. Our processing facility boasts one of the most advanced In-line Blanking & Precision Sheet Cut to Length lines which can achieve the best tolerances using advanced blanking technology in the industry. The leveller for precision levelling offers options from 0.5mm to 2mm thickness.
RBI LINE MACHINE CAPABILITY | ||
INCOMING COIL SPECIFICATION | ||
1 | Max coil mass | 26 tons |
2 | Material type | HRC; CRC; Galv; Chromadek & Electrogalv |
3 | Max entry width | 1 650 mm |
4 | Min entry width | 400 mm (To be quoted on request) |
5 | Coil ID sizes | 508 mm to 760 mm (508,610,760) |
INCOMING MATERIAL SPECIFICATION | ||
1 | Max thickness | 2.0 mm |
2 | Min thickness | 0.5 mm |
DIMENSIONS: | ||
SHEET SPECIFICATION | ||
1 | Max sheet length | 3700 mm |
2 | Min sheet length | 300 mm (Blanking rates apply) |
4 | Max pack mass | 3500 kg |
5 | Max stack height | 600 mm |
TOLERANCES: | ||
FULL SHEETS | ||
1 | Length accuracy | -0; +2 mm |
2 | Width accuracy | As per mill spec. |
3 | Diagonal (D1-D2) | ±3 mm |
4 | Edge burr | ≤ 5% of Material Thickness |
RBI LINE MACHINE CAPABILITY – BLANKING | ||
INCOMING COIL SPECIFICATION | ||
1 | Max coil mass | 26 tons |
2 | Material type | CRC; Galv & Electrogalv |
3 | Max entry width | 1300 mm |
4 | Min entry width ex slitter | 1000 mm |
5 | Min entry width – coil | 925 mm |
6 | Coil ID sizes | 508 mm to 760 mm (508,610,760) |
INCOMING MATERIAL SPECIFICATION | ||
1 | Max thickness – Hot Rolled | 1.50 mm |
2 | Max thickness – CR and GALV | 2.00 mm |
2 | Min thickness | 0.5 mm |
DIMENSIONS: | ||
BLANKING SPECIFICATION | ||
1 | Max blank length | 2400 mm |
2 | Min blank length | 300 mm |
3 | Min blank width | 80 mm – max 6 blanks per set-up |
4 | Max pack mass | 2000 kg |
5 | Max stack height | 600 mm – Depends on No. of blanks across width |
Note: Quality of narrow blanks cannot be guaranteed as the strips will twist | ||
TOLERANCES: | ||
BLANKING SPECIFICATION | ||
1 | Length accuracy | -0; +1.5 mm |
2 | Width accuracy | ± 0.5 mm |
3 | Diagonal (D1-D2) | ± 1.5 mm |
4 | Edge burr | ≤ 5% of Material Thickness |
MAXIMUM BLANKS PER GAUGE | ||
1 | 2.0 MM | 6 Across width |
2 | 0.5MM TO 1.6MM | 8 Across width |