OVERVIEW:
Take a coil of steel, uncoil it and then cut longitudinally along the full length of the coil. It results in coils in similar lengths but different width, this is known as a slitting line.
The slitter is a medium gauge slitter offering precision slitting of mild steel coil. The machine is fitted with interchangeable slitter heads offering quick setup changeovers. The slitters make use of shimless tooling and software generated setups to provide accurate consistent slitting. The recoiler capability to rewind a full coil masses up to 26tons provides an added advantage for customers seeking maximum build-up slits.
We comply with ISO 9001/2000 Quality standards.
Slitting Processing Specifications
Incoming Coil Specifications
| 1. |
MAX COIL MASS |
26TONS |
| 2. |
2. MAX COIL OD |
1850mm |
| 3. |
MATERIAL TYPE |
HR, CR, GALV AND CHROMADEK |
| 4. |
MAXIMUM ENTRY WIDTH |
1550mm |
| 5. |
MINIMUM ENTRY WIDTH |
800mm |
| 6. |
COIL ID SIZES |
500mm to 760mm |
Incoming Material Specifications
| 1. |
MAXIMUM THICKNESS |
0.4mm |
| 2. |
MINIMUM THICKNESS |
2.5mm (3mm for P and O) |
Slitting Specifications
| 1. |
MIN SLIT WIDTH |
27mm |
| 2. |
MAX SLIT WIDTH |
1500mm |
| 3. |
MIN TRIM |
3 x material thickness, but not less than 6mm |
| 4. |
RECOILER ID |
508mm |
| 5. |
MAX SLIT OD |
1850mm |
| 6. |
MIN SLIT OD |
750mm |
Tolerances – Guideline only:
| 1. |
WIDTH |
± 0.3mm/ or -0, + 0.4mm/ or +0,- 0.4mm |
| 2. |
CAMBER OVER 2m LENGTH |
4mm max |
| 3. |
EDGE BURR |
≤5% of MAT.THICKNESS |
PACKAGING OPTIONS:
- PACKED ON WOODEN PALLETS EYE TO SKY
- WOODEN SEPARATOR BLOCKS BETWEEN SLITS
- PLASTIC WRAPPED AND STEEL STRAPPED
OR
- PACKED EYE HORIZONTAL
- NO PALLET
- ALL SLITS NESTED TOGETHER AND STEEL STRAPPED